Terms of Use

 

 

Our CNA Automations are state-of-the-art microprocessor-based automation systems featuring user-friendly controls employing common theatre-industry terms and language for programming. All CNA Automations feature full network capabilities with the automation and remote systems communicating through a two-wire RS-485 Serial Link Cable called the Local Synchronous Network (LSN). The CineNet Gateway card or the VNC (Versatile Network Controller) provides an interface between the LSN network and a PC. This allows access to the CNA Automations with either CineNet Host or CineSuite software. CineSuite gives the ability to remotely access, program and monitor the CNA automations, flash update the CNA operating system, backup/copy programs and settings, access diagnostic information, view show information/history and produce summary reports.


CNA-200 Automation
  • Large back-lit LCD display for a user friendly interface in setup and programming. In normal operation, local system status is displayed as well as network fault messages.
  • Convenient manual override control switches are directly wired to the console termination panel via a quick connect harness.
  • Stores up to nine custom programs with each program containing up to 99 lines of instructions and up to 20 cues.
  • Custom programming for your theatre needs and supervisory mode for customizing system parameters.
  • Ten clock start times with time delay start.
  • Cue Learn feature.
  • Synchronous operation for up to 20 independent loops simultaneously.
  • Local and network copying for programs, clock start times, and system parameters (network only).
  • LSN and LIN Status displays status and diagnostic information of the network.
  • Duel Voltages.
  • Available in console, rack or wall mount versions.
  • Status LEDs for main CPU board displaying power, LSN and LIN status.
  • Password protection capability..
  • Can be programmed and monitored using Strong's CineNetTM Host or CineSuiteTM software.

 


CNA-150 Automation
  • Available in console, rack or wall mount versions.
  • Modular design allows for a number of installation configurations that will suit the particular needs of any theatre.
  • Termination Panels can be distributed in the booth according to their logical location. The panels are powered and controlled by the LIN network. This greatly reduces the wire count.
  • Custom programming of Film Sound, Lens/Masking and Lights.
  • Battery-backed memory can store up to nine different programs with up to nine cues each.
  • Intermission and Curtain Call functions standard.
  • Controls up to six sound formats.
  • Interlock operation allows up to nine independent loops simultaneously.
  • Manual override switches provide emergency control.
  • A 2x16 LED display shows the current program, show, and fault status.
  • Can be programmed and monitored using Strong's CineNetTM Host or CineSuiteTM software.

 


CNA-100 Automation
  • Available in console, rack or wall mount versions.
  • Modular design allows for a number of installation configurations that will suit the particular needs of any theatre.
  • Termination Panels can be distributed in the booth according to their logical location. The panels are powered and controlled by the LIN network. This greatly reduces the wire count.
  • Custom programming of Film Sound, Lens/Masking and Lights.
  • Battery-backed memory can store up to nine different programs with up to nine cues each.
  • Intermission and Curtain Call functions standard.
  • Controls up to six sound formats.
  • Interlock operation allows up to nine independent loops simultaneously.
  • Manual override switches provide emergency control.
  • Large alpha-numeric displays indicate program, show, and fault status.
  • Can be programmed and monitored using Strong's CineNetTM Host or CineSuiteTM software.

Installation & Operation Manuals

 

  

© Copyright - EPRAD, Incorporated 2000-2001, All Rights Reserved.   Privacy Statement